Hy Sirs, we have the following plc: CPU 214 DC 6ES7 214-1AC01-0XB0 . Can we download the Microwin program using an MPI cable? Or do we have to use the PPI cable? Thanks
So, to summarize it: 1. Connect an mpi cable to the mpi port of the pg and to port0 of the plc 2. Choose “CP5611 (PPI)” or “PC/PPI cable (PPI)” in set pg/pc interface (which one is better?) 3. Set baudrate to 9.6 Kbps in properties of ppi
There are some aftermarket MPI cables (Not made by Siemens) that will not work on the 200 series only the 300 series, they only have the MPI chip and not the 485 (PPI) this is to keep the cost low.