I am working on an old ME (PanelView) job, and running FTView Studio 5.10 in an XP Pro VM on my Win 7 machine.
I have had this working before, so know it can be done, but at present the VM cannot see the PLC on the network, so I can't get at the online tags.
How should i set the VM IP address ? ... in the same range as my PC, or leave it at it's default address, or even opt for NAT, none of them options appear to work.
I've tried Pinging the PLC, with no success.
VMware Workstation Player was recently upgrade from 14.0 to 14.1.7, wondering if that is the reason ...
I have had this working before, so know it can be done, but at present the VM cannot see the PLC on the network, so I can't get at the online tags.
How should i set the VM IP address ? ... in the same range as my PC, or leave it at it's default address, or even opt for NAT, none of them options appear to work.
I've tried Pinging the PLC, with no success.
VMware Workstation Player was recently upgrade from 14.0 to 14.1.7, wondering if that is the reason ...