I have a current project in which I must merge an existing SLC500 DH+ network into a DeltaV system.
Through our vendors, we have purchased a workstaion loaded with an Application Station and OPC mirror software.
From what I am learning, I need to create Input and Output paramaters in the control systems of the ProPlus system. After that, I use the OPC mirror to point to the AB memory locations that are to be assigned to those I/O paramaters.
Anybody done this? Is there a way to create a *.csv type file and import it into the ProPlus station for just one module area?
Any help or suggestions on this would be greatly appreciated.
Thanks,
pat
Through our vendors, we have purchased a workstaion loaded with an Application Station and OPC mirror software.
From what I am learning, I need to create Input and Output paramaters in the control systems of the ProPlus system. After that, I use the OPC mirror to point to the AB memory locations that are to be assigned to those I/O paramaters.
Anybody done this? Is there a way to create a *.csv type file and import it into the ProPlus station for just one module area?
Any help or suggestions on this would be greatly appreciated.
Thanks,
pat