I_Automation
Lifetime Supporting Member
(are you guys using cables with wires that are not numbered or color coded !? *)
Sealtite with all the pulled wires needed plus a few spares have to be labelled when cut. So, spares are labelled.
Still have customers demanding Sealtite on new installations and upgrades.
Plus, if a cable is labelled and stripped back to run the wires to the terminals and the spares are laying on the panel bottom it might be difficult to find which cable which bundle goes to - I had to move one line for a customer like this and there were about 20 cables that all had spares bundled and not labelled, just a pile of loops wires of trying to find the one wire you wanted was time consuming.