sultanahmed
Member
Hi Every one,
while PLC program uploading Ge fanuc CPU 90-30 CPU 313 having built in cpu 5 slots rack mounted and module ic693apu301 is attached with it , getting this error code.
dont know what exactly error is.
IC693APU301 picture is attached
Indication of module:
EN1 ON
EN2 OFF
stat ON
ok ON
cfg ON
Uploading from the connected device
Error 8036: Address '%AQ0002' on 'AQ0002[0]' is already used on 'AQ0001[1]'
Error 8036: Address '%AQ0003' on 'AQ0002[1]' is already used on 'AQ0001[2]'
Warning 8022: Type mismatch between variable and instruction. [LD Block,'ALLARMI': Rung 19]
Uploading: CONFIG VERSION
Uploading: REF MEMORY ALLOC
Uploading: RACK SLOT CONFIG
Uploading: I/O CONFIG
Uploading: SNP ID
Uploading: _MAIN.dec
Uploading: _MAIN.pdt
Uploading: COMBIT.pdt
Uploading: COMWORD.pdt
Uploading: PROFACE.pdt
Uploading: ALLARMI.pdt
Uploading: SINCRO.pdt
Uploading: Values - %R
Uploading: Values - %AI
Uploading: Values - %AQ
Uploading: Values - %G
Uploading: Values - %M
Uploading: Values - %Q
Uploading: Values - %I
_MAIN.pdt Processed successfully.
COMBIT.pdt Processed successfully.
COMWORD.pdt Processed successfully.
PROFACE.pdt Processed successfully.
ALLARMI.pdt Processed successfully.
SINCRO.pdt Processed successfully.
Building block: _MAIN....
Size of Logic Binary File = 165 Bytes
Successfully processed.
Building block: COMBIT....
Size of Logic Binary File = 168 Bytes
Successfully processed.
Building block: COMWORD....
Size of Logic Binary File = 249 Bytes
Successfully processed.
Building block: PROFACE....
Size of Logic Binary File = 202 Bytes
Successfully processed.
Building block: ALLARMI....
Size of Logic Binary File = 297 Bytes
Successfully processed.
Building block: SINCRO....
Size of Logic Binary File = 362 Bytes
Successfully processed.
---------- Post Processing ----------
%R Initial Values
%AI Initial Values
%AQ Initial Values
%G Initial Values
%M Initial Values
%Q Initial Values
%I Initial Values
---------- Upload from Controller completed ----------
Preparing target for import
Importing Hardware Configuration...
Importing Folder File...
Importing Smart Store...
Importing Variable File...
Importing block ALLARMI...
Importing block COMBIT...
Importing block COMWORD...
Importing block PROFACE...
Importing block SINCRO...
Importing block _MAIN...
The selected memory was successfully uploaded from the connected device.
Please Expert your opinion and expertise required thanks in advance.
while PLC program uploading Ge fanuc CPU 90-30 CPU 313 having built in cpu 5 slots rack mounted and module ic693apu301 is attached with it , getting this error code.
dont know what exactly error is.
IC693APU301 picture is attached
Indication of module:
EN1 ON
EN2 OFF
stat ON
ok ON
cfg ON
Uploading from the connected device
Error 8036: Address '%AQ0002' on 'AQ0002[0]' is already used on 'AQ0001[1]'
Error 8036: Address '%AQ0003' on 'AQ0002[1]' is already used on 'AQ0001[2]'
Warning 8022: Type mismatch between variable and instruction. [LD Block,'ALLARMI': Rung 19]
Uploading: CONFIG VERSION
Uploading: REF MEMORY ALLOC
Uploading: RACK SLOT CONFIG
Uploading: I/O CONFIG
Uploading: SNP ID
Uploading: _MAIN.dec
Uploading: _MAIN.pdt
Uploading: COMBIT.pdt
Uploading: COMWORD.pdt
Uploading: PROFACE.pdt
Uploading: ALLARMI.pdt
Uploading: SINCRO.pdt
Uploading: Values - %R
Uploading: Values - %AI
Uploading: Values - %AQ
Uploading: Values - %G
Uploading: Values - %M
Uploading: Values - %Q
Uploading: Values - %I
_MAIN.pdt Processed successfully.
COMBIT.pdt Processed successfully.
COMWORD.pdt Processed successfully.
PROFACE.pdt Processed successfully.
ALLARMI.pdt Processed successfully.
SINCRO.pdt Processed successfully.
Building block: _MAIN....
Size of Logic Binary File = 165 Bytes
Successfully processed.
Building block: COMBIT....
Size of Logic Binary File = 168 Bytes
Successfully processed.
Building block: COMWORD....
Size of Logic Binary File = 249 Bytes
Successfully processed.
Building block: PROFACE....
Size of Logic Binary File = 202 Bytes
Successfully processed.
Building block: ALLARMI....
Size of Logic Binary File = 297 Bytes
Successfully processed.
Building block: SINCRO....
Size of Logic Binary File = 362 Bytes
Successfully processed.
---------- Post Processing ----------
%R Initial Values
%AI Initial Values
%AQ Initial Values
%G Initial Values
%M Initial Values
%Q Initial Values
%I Initial Values
---------- Upload from Controller completed ----------
Preparing target for import
Importing Hardware Configuration...
Importing Folder File...
Importing Smart Store...
Importing Variable File...
Importing block ALLARMI...
Importing block COMBIT...
Importing block COMWORD...
Importing block PROFACE...
Importing block SINCRO...
Importing block _MAIN...
The selected memory was successfully uploaded from the connected device.
Please Expert your opinion and expertise required thanks in advance.