CallumMacEwen
Member
Hello,
I was wondering if you can have two separate controllers communicating to one Panel View Plus 700?
I was wondering if you can have two separate controllers communicating to one Panel View Plus 700?
PV Plus 700
- Thread starter CallumMacEwen
- Start date
dmargineau
Lifetime Supporting Member
PanelView Plus 7 Standard terminals allow only one CPU connection.
PanelView Plus 7 Performance terminals allow for multiple CPU connections.
PanelView Plus 6 terminals allow for multiple CPU connections.
PanelView Plus 7 Performance terminals allow for multiple CPU connections.
PanelView Plus 6 terminals allow for multiple CPU connections.
Similar Topics
My Panelview plus 700 HMI stopped working and I replaced it with a new one. Moved the sd card from the previously installed panel to this one and...
Good day all!
I need to make some modifications to a Panelview program.
I uploaded it from the unit. Tried to use the Application mgr. to...
Hi All. I am working on my home automation system again and i am looking at setting up a panelview.
Currently running an AB Compactlogix...
Hi. I'm working on a plant that has a panelview plus 700.
Problem is that from time to time, the alarm list shows an old false alarm instead of...