Deer
Member
- Join Date
- Jun 2002
- Posts
- 124
Hi PLC guys,
I have a PLC Allen Bradley with type PLC5/20, complete with analog (1771-IFE/C, 1771-OFE)and digital modules.
Using RSLogix5 software, I have try to upload data from PLC5.
When the software RSLogix5 going to offline mode (PLC5 still running),on the I/O configuration we don't find list the I/O that has installed on the chassis PLC5/20.
The problem is, I don't know how to defined or read addresing each channel on the analog modules (1771-IFE/C, 1771-OFE), since analog module doesn't use addressing mode (1 slot, 1/2, 2slot,).This addressing only for digital modules.(different with SLC500, when upload program use RSLogix500, we can get list of all I/O Configuration even digital or analog modules).
Does anybody has experience it?
I have a PLC Allen Bradley with type PLC5/20, complete with analog (1771-IFE/C, 1771-OFE)and digital modules.
Using RSLogix5 software, I have try to upload data from PLC5.
When the software RSLogix5 going to offline mode (PLC5 still running),on the I/O configuration we don't find list the I/O that has installed on the chassis PLC5/20.
The problem is, I don't know how to defined or read addresing each channel on the analog modules (1771-IFE/C, 1771-OFE), since analog module doesn't use addressing mode (1 slot, 1/2, 2slot,).This addressing only for digital modules.(different with SLC500, when upload program use RSLogix500, we can get list of all I/O Configuration even digital or analog modules).
Does anybody has experience it?