We have a AB PLC-5/40 hot back-up system with 1746 Remote I/O and would like to interface Cutler-Hammer Westinghouse IQ-1000 II, IQ Data Plus Motor Protection System Relays to the PLC. The relays can be connected on a Westinghouse Local Area Network called INCOM.
Is there any solution available for this?
An alternative solution by which these relays can be interfaced to a new stand-alone Allen-Bradley PLC is also acceptable.
Is there any solution available for this?
An alternative solution by which these relays can be interfaced to a new stand-alone Allen-Bradley PLC is also acceptable.