Stratix 8000 - IGMP Snooping

Hi,
Can anyone tell me if the IGMP snooping is enabled if the Stratix 8000 is used in a way straight out of the box using the factory defaults.

I have managed to program a spare unit for an IP address where I can check the box for IGMP snooping but the one online at the moment is factory default.

I would assume the snooping is enabled but just asking for clarification.

Thanks

Andy

512151 - Stratix 8000/8300: Enabling IGMP Snooping
Access Level: TechConnect

Yes, IGMP is indeed enabled by default on the Stratix 8000 switches.

Regards,
George

Thanks George , thought that was the case. Just wanted confirmation.