Studio 5000 Master Offset

Stanly1355

Member
S
Join Date
Nov 2020
Location
US
Posts
3
I'm trying to offset Main CIP (Master) for other slaves (Drives). I have 360 Rotary Scaling.

For the MAPC I'm using "(360.0 + Master.ActualPosition - Slave.Offset) MOD 360" and then output goes into "Cam Lock Position". Is there a better way to do it?

Also, anyone knows if it's possible to offset Master for MAOC?
 

Similar Topics

B
Studio 5000 - Time Sync Grandmaster Priority - Control Sync and Module Connection Faults
I have to start out by saying I am not a PLC programmer and I have basic programming skills but mainly use software as a troubleshooting tool. I...
Replies
0
Views
129
Bobcat22
B
T
How do you program an AB Guardmaster 440G Spartan in Studio 5000?
Hi All, On our site, we normally use trapped keys for our safety gates, however, for our newest project, I have been told that we will be using...
Replies
1
Views
1,012
joseph_e2
J
D
Studio 5000 Exponential error
Hi Everyone. Not posted on here for a long time, but I am hoping someone can help me. I am doing a differential pressure calculation in a L27ERM...
2
Replies
15
Views
196
drbitboy
drbitboy
R
Studio 5000 (V24) Two Integers to REAL
Hi, how do I convert 2x Integer registers to a Real? The two integers are from Modbus registers that contain a floating point value, I need to...
Replies
2
Views
116
drbitboy
drbitboy
B
Extract time from Yaskawa registers in Studio 5000
What is the best way to extract the hour and minute from the register that comes from Yaskawa VFD. In studio 5000 I have a register saved as INT...
Replies
3
Views
119
Bart_PSI
B
Back
Top Bottom