Read Lenze Parameters with C#

hein123

Member
H
Join Date
Aug 2010
Location
Uitenhage
Posts
93
Is it possible to read Lenze Parameters with C#?

I know anything is possible but has a way be found like Snap7 with Siemens?
 

Similar Topics

N
Read Data from lenze drive
Hello All, On my project, connect S7-314-dp to 7 lenze drives with profibus. I can write data to lenze. For example C11, C12..But cant read...
Replies
3
Views
1,822
HJTRBO
HJTRBO
L
Read pulses from a magnetic-inductive flow meter and modify pulses by a user inputted valve and to output the modified rate to another pulse reader
Hi, The hardware is: Click Plc model # CO-O1DD1-O HMI model # S3ML-R magnetic-inductive flow meter model # FMM100-1001. I will set the flow meter...
Replies
4
Views
135
Steve Bailey
Steve Bailey
A
Logix 5000 FAL Read Every Other Member
Is there a way to use the FAL instruction to do +=2 instead of +=1? I have an array that is organized with alternating "data" and "flag" values...
Replies
5
Views
126
AMarks95
A
C
ControlLogix read force status in plc program
Hi everyone i have a customer, who wants to show an alarm on the machine, if the I/O forces are enabled and set, on at ControlLogix L81E with...
Replies
3
Views
236
crawler009
C
L
Read real data from hmi to plc
Hi Iam using monitouch hmi(V9 soft) with omron plc cj2m (CX programmer). In this I want to read a data from hmi to plc. The data was like...
Replies
0
Views
94
Lee sung
L
Back
Top Bottom