PM - Request, .prj file conversion

RussB

Lifetime Supporting Member
RussB
Join Date
Oct 2003
Location
Michigan
Posts
2,914
***************
I have a prj file I want to load on Proficy Machine Addition. I see that you are doing this conversion for people. Can you tell me how to do it? If not can I would like to send you the file (email address). It looks like it cannot be attached to this message.
Thanks! Simon
***************
Click to expand...
You will find instructions here:
https://ge-ip.force.com/communities/CC_Knowledge?product=QuickDesigner__c&q=convert%20to%20Proficy
Should you run into problems please post the .prj file on this site after zipping it and someone will assist you.
 
Last edited:

Similar Topics

R
Odd request RSLogix5000 - Send 80 character string from One PLC to another with I/O
So I had an odd request from a customer for the above. I have written the logic and tested it all in one PLC with only using 7 outputs and 7...
2
Replies
15
Views
427
drbitboy
drbitboy
M
Program Printout request
Hello all, I hope you're all doing well. I am a complete newbie with a program sent by the manufacturer. I want to use it on a different plc, as...
Replies
3
Views
313
parky
P
drbitboy
A request about how to post images
I know it is fairly simple to post a screenshot, but many of us have large screens, so perhaps y'all could take the time to trim those screenshots...
Replies
4
Views
515
drbitboy
drbitboy
J
Ping Request Timed Out
Good afternoon all I'm a bit puzzled. 19 inch AB HMI. addressed 192.168.1.22. laptop 192.168.1.10. I can see it in Linx. I can download .mer to...
Replies
3
Views
623
John Morris
J
M
Manual/Tutorial request for B&R NC154 module
Hi. I am trying to understand some old code for B&R 2005 PLC created in PG2000 software. There are procedures concerning axes but I cannot find...
Replies
2
Views
717
MereNonsense
M
Back
Top Bottom