jthornton Member J Join Date Jul 2002 Location Poplar Bluff, MO Posts 295 Aug 16, 2017 #1 I'm porting a Click program to a DL06 and I'm wondering if the LD then OUT (not a bit out) is the same as the Click Copy Single instruction? Thanks JT
I'm porting a Click program to a DL06 and I'm wondering if the LD then OUT (not a bit out) is the same as the Click Copy Single instruction? Thanks JT
icky812 Lifetime Supporting Member Join Date May 2002 Location Phoenix, AZ Posts 732 Aug 17, 2017 #2 Depends on if it is just a LD then immediately followed by OUT. If so, then yes it is the same.
jthornton Member OP J Join Date Jul 2002 Location Poplar Bluff, MO Posts 295 Aug 29, 2017 #3 I actually solved this using the DL32 drum instruction which worked rather well. JT