Hello,
I've done several migrations from SLC 5/05's to 5370 L33ER Compactlogix controllers.
I've just encountered my first PID instructions with STI timing parameters. Is this similar to a PID within a scheduled task in new controllers?
Do I need to make any special changes or will the conversion tool translate this fairly seamlessly? I know I'll have to verify the PID from the PCE warnings, but I'm just concerned about the PID executuion once converted.
They control several high output pumps. Any insight from any of the vets out there is as always appreciated.
Thanks,
Ben
I've done several migrations from SLC 5/05's to 5370 L33ER Compactlogix controllers.
I've just encountered my first PID instructions with STI timing parameters. Is this similar to a PID within a scheduled task in new controllers?
Do I need to make any special changes or will the conversion tool translate this fairly seamlessly? I know I'll have to verify the PID from the PCE warnings, but I'm just concerned about the PID executuion once converted.
They control several high output pumps. Any insight from any of the vets out there is as always appreciated.
Thanks,
Ben