I am a robot technician at work where we use mostly Omron PLC's. About 8 years ago I took a course on PLC's (Texas Instruments). We used a DOS program (TI405) for programming. The I/O's were very easy - X for input Y for output C for (internal) control relay. I recently aquired a copy of Syswin for Omron PLC's and am having trouble figuring out how to put the inputs and outputs in. I've been through the manual and a couple of e-books and still can't find the answer. I read (in the manual I think) that internal relays need no prefix... OK, so what prefix do I need to put for an external output? I'm working on this at home and have no PLC here, so I'm working offline and can't try out the programs to see if I'm getting an output.
Any help would be GREATLY appreciated.
Thanks,
Ken
Any help would be GREATLY appreciated.
Thanks,
Ken