Micrologix and Sick Inspector?

Hello Friends

I need to control a sick inspector I40 (VSPI) over Ethernet.
I have seen that it is posible with a CompactLogix, but I have a Micrologix 1100 and 1400.
Do you know if is it posible to control with a Micrologix?
Do you have a sample program o documentation about how to do that?

Thanks in advance.

I have not done this, but it looks possible using Ethernet IP.
Here is a link for setting up the Sick:
https://www.youtube.com/watch?v=cCe2DhI6lhQ
Here is some information on setting up the PLC:
http://literature.rockwellautomation.com/idc/groups/literature/documents/at/750com-at001_-en-p.pdf

I hope this helps you out.
Regards,