MikeVT
Lifetime Supporting Member
I'm having problems connecting with a GE VersaMax Micro PLC. I'm using VersaPro software, com port, to SNP (15-pin) connector on PLC. Connecting cable has LED's on it to 'see' communication. I don't even get a hint of a flicker from these LED's. Cable/computer/com port verified in working order on an LM-90/30 & LM90 software. Any hints or gotcha's you can help me with would be much appreciated. I'm starting to think the SNP port on the PLC might have failed. I was online with this PLC about 2 years ago, with the same computer/cable/software package.