Archie
Member
I'm in the process of creating some controls to be used with the DF1Comm open source project that works with SLC's and MicroLogix:
http://sourceforge.net/projects/abdf1/
These controls (buttons, gages, tanks, etc.) will link to the communication component without the need to write any VB code. Here is what I've created so far:
I want some very good quality graphics, but the problem is that my artistic talent is very limited. I'm wondering if there is anyone with good computer graphic art skills that would be willing to help draw the controls. I just need the graphics and I will take it from there and add the associated code.
When it is done, you will be able to create basic HMI's using all free software without writing a single line of code. The controls will be put on sourceforge with the current DF1Comm component where it will be available for free.
I know I'm asking a lot to get volunteer work, but you will get a useful piece of software back for the effort.
Anyone not familiar with this project can learn a little about it here:
http://www.youtube.com/watch?v=CiPzqc5jDlE
http://www.youtube.com/watch?v=1-5STcYWQ7k
http://sourceforge.net/projects/abdf1/
These controls (buttons, gages, tanks, etc.) will link to the communication component without the need to write any VB code. Here is what I've created so far:
I want some very good quality graphics, but the problem is that my artistic talent is very limited. I'm wondering if there is anyone with good computer graphic art skills that would be willing to help draw the controls. I just need the graphics and I will take it from there and add the associated code.
When it is done, you will be able to create basic HMI's using all free software without writing a single line of code. The controls will be put on sourceforge with the current DF1Comm component where it will be available for free.
I know I'm asking a lot to get volunteer work, but you will get a useful piece of software back for the effort.
Anyone not familiar with this project can learn a little about it here:
http://www.youtube.com/watch?v=CiPzqc5jDlE
http://www.youtube.com/watch?v=1-5STcYWQ7k
Last edited: