automationMan
Member
Is this possible? I'll use this scenario as an example.
I have a function block that represents the behavior of an I/O card, say a 2 channel thermocouple card, and it has read, write, and configure behavior. so I have a separate read function block and a write function block, etc. Almost any card I use Analog Input cards, outputs cards, etc will use the read, write, configure fb's. So my question is, I want to 'read a value from the thermocouple 2 card',
I would call
<code>
thermo2.read(word);
</code>
is this possible?
I have a function block that represents the behavior of an I/O card, say a 2 channel thermocouple card, and it has read, write, and configure behavior. so I have a separate read function block and a write function block, etc. Almost any card I use Analog Input cards, outputs cards, etc will use the read, write, configure fb's. So my question is, I want to 'read a value from the thermocouple 2 card',
I would call
<code>
thermo2.read(word);
</code>
is this possible?