mustbemad10
Member
I have an COROS OP15-C1 (6AV3515-1MA20-1AA0) that I would like to get an upload of the program.
I don't know whether the project was written in ProTool or Com Text, so I wanted to try using Com Text first to see if it allowed me to upload it.
I have a copy of Com Text, but I have never used it before. How do I try to upload the project from the OP15?
In Com Text I have seen the options FD to TDOP, TDOP to FD & FD to FD. I can't find what these mean.
I have read that if ProTool was used then I won't be able to get an upload, possible only get a backup using ProSave. If that is the case then I will have to attack the problem a different way.
The OP-15 has a FM V2.30/1.
Appreciate some help on this.
Cheers
I don't know whether the project was written in ProTool or Com Text, so I wanted to try using Com Text first to see if it allowed me to upload it.
I have a copy of Com Text, but I have never used it before. How do I try to upload the project from the OP15?
In Com Text I have seen the options FD to TDOP, TDOP to FD & FD to FD. I can't find what these mean.
I have read that if ProTool was used then I won't be able to get an upload, possible only get a backup using ProSave. If that is the case then I will have to attack the problem a different way.
The OP-15 has a FM V2.30/1.
Appreciate some help on this.
Cheers