Mordo
Member
I'm trying to link my Intouch 9.5 application to the PLC (Siemens 315T-2DP) via OPC with Simatic Net7 on an Industrial Ethernet link.
I've been told to install Wonderware FSGateway, but since I'm not familiar with both products, I'm giving a hand to our automation department, I'd like to get the procedures to get Intouch to talk to the PLC.
Thanks
_______________________________
Dany Béland
Mechanical engineering technician
Divel Inc.
I've been told to install Wonderware FSGateway, but since I'm not familiar with both products, I'm giving a hand to our automation department, I'd like to get the procedures to get Intouch to talk to the PLC.
Thanks
_______________________________
Dany Béland
Mechanical engineering technician
Divel Inc.