Byron
Lifetime Supporting Member
George- THANKS!!! I hope to reply in bits to this post with clear questions. Before I do,
I'm attaching several images to show the failed results with the newer versions- 10 thru 19 I have on one laptop. I can't recall now which version it defaulted to when I attempted the upload.
Today I followed some of your directions and was able to install the v.8.52 (the 8.20 is a reference to the Firmware- see the images) BUT, I ignored the comment regarding LINX. I use 2.52 on that laptop. I actually went online, started uploading from the PLC it got to about 3 progress bar segments then said can't do it. I'll try and upload those screenshots as well. I worked late, so if I don't finish tonight I hope to do so tomorrow.
I wanted to add: The SECRET to installing the version 8.52 is as mentioned: install just the program- uncheck the other boxes and install them later... that is the problem and why it stops at 47% on the install... thanks again George!