forqnc
Lifetime Supporting Member
Hi,
I am having issues with Studio 5000 v32.02 and connecting to a 523 PowerFlex drive via Ethernet.
My network consists of a 5380 CompactLogix 5069-L306ER connected via an unmanaged switch to 2 PowerFlex drives.
A 525 with embedded Ethernet and the 523 using a 25-COMM_E2P ethernet card.
I can connect to the 525 through Studio Ok, but I get an error when trying to connect to the 523. It shows the 523 in the popup window but fails to upload. See attached.
RSLinx Classic can see the 523 and CCW software can connect to it, just not Studio 5000.
I did go to Rockwell's site and download the latest AOP still no luck.
There is a lot of information out there for the 525, but not a lot for the 523.
Any assistance is appreciated.
I am having issues with Studio 5000 v32.02 and connecting to a 523 PowerFlex drive via Ethernet.
My network consists of a 5380 CompactLogix 5069-L306ER connected via an unmanaged switch to 2 PowerFlex drives.
A 525 with embedded Ethernet and the 523 using a 25-COMM_E2P ethernet card.
I can connect to the 525 through Studio Ok, but I get an error when trying to connect to the 523. It shows the 523 in the popup window but fails to upload. See attached.
RSLinx Classic can see the 523 and CCW software can connect to it, just not Studio 5000.
I did go to Rockwell's site and download the latest AOP still no luck.
There is a lot of information out there for the 525, but not a lot for the 523.
Any assistance is appreciated.