I would be very thankful if you help me with my problem in k120s lg plc ,
We have k120s with Rnet communication module and 3 smart i/o with ( 16 input 16 output each ) I already connect them and they work well but with only 1 smart and I don’t know why the other 2 not work , something wrong with the parameters or in addressing or in what ? , those are the parameters which i entered in the list as a master in filedbus
For the 1st smart i/o output
Tx: l000 to l00f
Rx : p090
Block 0 , station 1
For 2nd smart i/o output
Tx : l010 to l01f
Rx090
Block 1 , station 2
for 1st smart i/o input
Tx : m0000 to m000f
Rx080
block 2 , station 1
for 2nd smart i/o input :
Tx : m0010 to m001f
Rx080
block 3 , station 2
We have k120s with Rnet communication module and 3 smart i/o with ( 16 input 16 output each ) I already connect them and they work well but with only 1 smart and I don’t know why the other 2 not work , something wrong with the parameters or in addressing or in what ? , those are the parameters which i entered in the list as a master in filedbus
For the 1st smart i/o output
Tx: l000 to l00f
Rx : p090
Block 0 , station 1
For 2nd smart i/o output
Tx : l010 to l01f
Rx090
Block 1 , station 2
for 1st smart i/o input
Tx : m0000 to m000f
Rx080
block 2 , station 1
for 2nd smart i/o input :
Tx : m0010 to m001f
Rx080
block 3 , station 2