Reading DATA from FoxRtu station or isagraf via OPC server

Mike_ant

Member
M
Join Date
May 2017
Location
USA
Posts
13
Hello guys ,
i'm stuck and can't figure out how to make a communication between foxrtu station (soft to configure FOXBORO SCD2200 RTU with isagraf 5.13 integred ) and An OPC Server (KepserverEX or Matrikon opc )
i use DNP Variables . i want to add an hmi and do a simulation
anyone who has achieved this or worked on it before ?
any tips ?
thanks in advance
 

Similar Topics

A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
115
bkottaras
B
J
Reading Live Data From a PLC
Hello! New to the forum and new to PLCs in general. We have an ABB AC500 PLC (circa 2012?) and we are using CoDeSys (version 2.something). We're...
Replies
0
Views
636
juan_valdez
J
A
Reading Position Sensor data on Micrologic 1400 series B using MSG implicit messaging
Hello Ken Roach, Thank you for your quick reply , As informed earlier i want to read P&F Sensor data on Micrologic 1400 series B using MSG...
2
Replies
17
Views
5,798
anoopgupta2008@gmail
A
P
Reading 1791DS-IB8XOB8 I/O Status data
Anyone experience of working with these modules and interrogating status of an I/O port? The modules can throw up a red LED indicator to say an...
Replies
0
Views
1,083
papacroft
P
C
Micro850 PLC-Data tags not reading
Hello, I have a Micro850 PLC that has 5 2080-IF4 plug-in modules attached. Each of these modules are programmed to read 4-20 mA output signals...
Replies
4
Views
2,311
chowam01
C
Back
Top Bottom