JJI
Member
HI there! I'm new here and was looking for some help with getting my HSC to work.
I have physically connected an encoder to the PLC and it is working properly.
I added the interrupt to the control and linked it to a program as well as assigned it to the input HSC0. I adjusted the input filters for input 0 and 1.
I have inserted the block into the ladder and populated the tags with what I believe to be the correct data.
At this point the block will not enable and only shows a status of "0".
I added a global variable that enables me to change the "command" and even toggling it i can't seem to enable the function block.
I have physically connected an encoder to the PLC and it is working properly.
I added the interrupt to the control and linked it to a program as well as assigned it to the input HSC0. I adjusted the input filters for input 0 and 1.
I have inserted the block into the ladder and populated the tags with what I believe to be the correct data.
At this point the block will not enable and only shows a status of "0".
I added a global variable that enables me to change the "command" and even toggling it i can't seem to enable the function block.