AutomationEngineer82
Member
Hi
I am trying to do my hardware configuration in Mitsubishi's GX Works 3, version 1.026C.
I am using Main Base R38B, Power supply R61P and R04ENCPU. When I go to menu bar Edit > Check > Power Supply Capacity and I/O Points Everything turns out good.
But When I go to manu bar Edit > Check > System configuration I get this message in the Output window in the bottom of GX Works 3:
Explanation: "Module to use in combination with the module (R04ENCPU) mounted to CPU Slot has not been mounted."
Occurrence site: "R04ENCPU"
Error Code: "NV_E00116"
In Mitsubishi's e-Manual Viewer, Cross Document Search, I get this when I search for explanations for the error code:
"NV_E00116: When safety CPU module and safety function module on same configuration do not exist or when safety function module in configuration included safety CPU module does not exist"
I do not even know what to do with this information. But I do know that it doesn't work to save the Project Before having solved this problem.
I am trying to do my hardware configuration in Mitsubishi's GX Works 3, version 1.026C.
I am using Main Base R38B, Power supply R61P and R04ENCPU. When I go to menu bar Edit > Check > Power Supply Capacity and I/O Points Everything turns out good.
But When I go to manu bar Edit > Check > System configuration I get this message in the Output window in the bottom of GX Works 3:
Explanation: "Module to use in combination with the module (R04ENCPU) mounted to CPU Slot has not been mounted."
Occurrence site: "R04ENCPU"
Error Code: "NV_E00116"
In Mitsubishi's e-Manual Viewer, Cross Document Search, I get this when I search for explanations for the error code:
"NV_E00116: When safety CPU module and safety function module on same configuration do not exist or when safety function module in configuration included safety CPU module does not exist"
I do not even know what to do with this information. But I do know that it doesn't work to save the Project Before having solved this problem.