Pete_S
Member
Hi,
I am programming an S7 1215C to function in a sudo SCADA demo. I am running the 120V supply for the 1215 through a voltage and current transducer. These 2 transducers are in turn feeding the 2 onboard analog inputs. I am trying to determine the easiest way to periodically run logic that would increase the current draw of the 1215C so I can make less static dashboards. Any suggestions would be greatly appreciated.
I am programming an S7 1215C to function in a sudo SCADA demo. I am running the 120V supply for the 1215 through a voltage and current transducer. These 2 transducers are in turn feeding the 2 onboard analog inputs. I am trying to determine the easiest way to periodically run logic that would increase the current draw of the 1215C so I can make less static dashboards. Any suggestions would be greatly appreciated.