pranav.mistry003
Member
Dear all Respected Masters..
I m facing very strange problem regarding SLC 5/05.
I m running Windows XP in my Laptop.
I have RSLinx, RSLogix 500 installed in my Laptop and running perfectly.
I m having USB-Serial Converter to access the Serial port of SLC directly from the Laptop, and for remote access of SLC there is a pair of Modems. (I need to communicate with my SLC via serial port only as the SLC is in Remote Location and communicates through Modems.)
I successfully downloaded the program in SLC via serial port. But after downloading the program, the Serial port of SLC stopped communicating.. (The downloaded program was working perfectly few days ago and it is not modified there after.)
Now only Ethernet port is in working condition and it can communicate too. As I can see in the Channel Configuration of Ladder Program in SLC via Ethernet, Channel 1 and Channel 0 are having proper configuration exist.
I've tried to download the program again via Ethernet Port but still the same problem perceived.
I've checked all Cables, Serial Port of PC and USB to Serial Converter. They all are in working condition.
Please tell me is there any other way to check the functionality of Serial Port or How can I solve my problem?
Thanking you all in advance..
With Warm Regards..
Pranav Mistry.
I m facing very strange problem regarding SLC 5/05.
I m running Windows XP in my Laptop.
I have RSLinx, RSLogix 500 installed in my Laptop and running perfectly.
I m having USB-Serial Converter to access the Serial port of SLC directly from the Laptop, and for remote access of SLC there is a pair of Modems. (I need to communicate with my SLC via serial port only as the SLC is in Remote Location and communicates through Modems.)
I successfully downloaded the program in SLC via serial port. But after downloading the program, the Serial port of SLC stopped communicating.. (The downloaded program was working perfectly few days ago and it is not modified there after.)
Now only Ethernet port is in working condition and it can communicate too. As I can see in the Channel Configuration of Ladder Program in SLC via Ethernet, Channel 1 and Channel 0 are having proper configuration exist.
I've tried to download the program again via Ethernet Port but still the same problem perceived.
I've checked all Cables, Serial Port of PC and USB to Serial Converter. They all are in working condition.
Please tell me is there any other way to check the functionality of Serial Port or How can I solve my problem?
Thanking you all in advance..
With Warm Regards..
Pranav Mistry.