hickman
Member
I have 13 inputs assigned to 1:0001 - 1:0013 and 12 outputs assigned to 0:0001 - 0:0012.
In Concept's simulator, everything works fine. But after I download
the program to the Momentum and start the controller, nothing happens.
Physically, I have:
Have any suggestions?
Thanks in advance!
FYI: This Momentum is 24 VDC powered, 24 VDC inputs/outputs. No dry contacts.
In Concept's simulator, everything works fine. But after I download
the program to the Momentum and start the controller, nothing happens.
Physically, I have:
- 24 VDC 'hot' legs wired to row 1, inputs 1 - 13.
- positive side of 24 VDC coils wired to row 2, outputs 1 - 12.
- negative side of 24 VDC coils wired to row 3, outputs 1 - 12.
Have any suggestions?
Thanks in advance!
FYI: This Momentum is 24 VDC powered, 24 VDC inputs/outputs. No dry contacts.