DaDaDadeo
Member
This example clears the output string, loads the 2 starting ascii characters stored in N7:0 (which can be edited and monitored using the ascii radix). The string length must be updated before concatenating the serial number string. The example serial number is only a rudimentary conversion of an integer to string. Instead of adding more code to finish the string, use the AWA to add the termination characters automatically. This is configured in the PLC Channel properties.
Although this was done using the RS500 Emulate, it works pretty much the same for MLX and SLCs.
Although this was done using the RS500 Emulate, it works pretty much the same for MLX and SLCs.
Last edited: