PLCDontUQuitOnMe
Member
I am trying to export the alarm history on a Panelview Plus 7 to a USB stick. I cannot get it to write to the USB stick.
I have tried the following:
In FTView Studio, under CSV Export setup:
I have "Enable CSV Export" checked
Under "type" I have "alarm information" checked
Under "connection" I have my export trigger that I have checked that it is coming on and off when I press the pushbutton assigned to that tag.
Under Path, I have tried:
\Storage card2
\USB Storage\
When I tried it with the path set to \USB Storage\ and I went to the desktop of the panelview, there was a folder called \USB Storage\ in file explorer, but it appeared to be on the local disk, and not written to the USB.
I am assuming I do not have the correct path set up for this to work. Anyone have any ideas? I don't have any kind of techconnect contract so I'm hoping someone here can assist.
I have tried the following:
In FTView Studio, under CSV Export setup:
I have "Enable CSV Export" checked
Under "type" I have "alarm information" checked
Under "connection" I have my export trigger that I have checked that it is coming on and off when I press the pushbutton assigned to that tag.
Under Path, I have tried:
\Storage card2
\USB Storage\
When I tried it with the path set to \USB Storage\ and I went to the desktop of the panelview, there was a folder called \USB Storage\ in file explorer, but it appeared to be on the local disk, and not written to the USB.
I am assuming I do not have the correct path set up for this to work. Anyone have any ideas? I don't have any kind of techconnect contract so I'm hoping someone here can assist.