Im using studio 5000, in my software, Im using E300 overload protection relay to control a motor.
Studio 5000 Version 32.12
E300 Version 7
While controlling motor all seems to be ok, but while we were testing what would happen if we lose communication / power to E300 strange things seems to happen.
Some inputs of this datablock - AB:E300:I:3 - get written even without the communication with E300 relay(communication loss is instantaneous)
I tried to delete all instances where I m writting in this datablock and it still gets written. why?
Studio 5000 Version 32.12
E300 Version 7
While controlling motor all seems to be ok, but while we were testing what would happen if we lose communication / power to E300 strange things seems to happen.
Some inputs of this datablock - AB:E300:I:3 - get written even without the communication with E300 relay(communication loss is instantaneous)
I tried to delete all instances where I m writting in this datablock and it still gets written. why?