Hi All,
I am using the OMRON CQM1 CPU21 to measure the machine downtime and do some calculation and display in the FactoryTalk View SE (Computer) as well as allow user to key in some data from the FactoryTalk View SE. However, the FactoryTalk View SE were not able to display the exact value that get from the OMRON CQM1 CPU21 as well as the OMRON CQM1 CPU21 were not able to get the data that key in from the FactoryTalk View SE. Data in the OMRON CQM1 CPU21 is in BCD data type, the numeric display and numeric input in FactoryTalk View SE are in Integer. But, I had try different data type (numeric display & input) in FactoryTalk View SE, and it is still not successful to display and key in. May I know what is the problem that cause it?
Thank you.
I am using the OMRON CQM1 CPU21 to measure the machine downtime and do some calculation and display in the FactoryTalk View SE (Computer) as well as allow user to key in some data from the FactoryTalk View SE. However, the FactoryTalk View SE were not able to display the exact value that get from the OMRON CQM1 CPU21 as well as the OMRON CQM1 CPU21 were not able to get the data that key in from the FactoryTalk View SE. Data in the OMRON CQM1 CPU21 is in BCD data type, the numeric display and numeric input in FactoryTalk View SE are in Integer. But, I had try different data type (numeric display & input) in FactoryTalk View SE, and it is still not successful to display and key in. May I know what is the problem that cause it?
Thank you.