ayman_engineer56
Member
I have rs view 32 scada running on pc with dh+ network
. So the rs view running channel is the 1st channel (as dh+ network interface card ) . I want to add a new plc to it as a new node for scada without adding it to the dh+ plc's network . .but it has an Ethernet communication port . I'm asking about if the rs view32 has the feature of communicate with 2 nodes at different communication channels simulatinously . Because the new plc doesn't had any dh+ port . And away from the existing plc's network.
. So the rs view running channel is the 1st channel (as dh+ network interface card ) . I want to add a new plc to it as a new node for scada without adding it to the dh+ plc's network . .but it has an Ethernet communication port . I'm asking about if the rs view32 has the feature of communicate with 2 nodes at different communication channels simulatinously . Because the new plc doesn't had any dh+ port . And away from the existing plc's network.
Last edited: