mohannad_madhoun
Member
Dir all,
I am trying to configure moeller CPU XC101 with master profibus XIOC-NET-DP-M to communicate with slave profibus station from Siemens "Distributed I/O System ET 200S":
So the hardware consists of:
* Master station "Moeller":
· XC101 CPU
· master profibus XIOC-NET-DP-M
* Slave station "Siemens":
· ET 200M interface module "6Es7 153-2BA00-0XB0"
· Digital output card "322-1BH01-0AA0"
I downloaded the GSD file from Siemens web site . My entire configuration don by Xsoft program.
Notes:
· I configured CPU XC101 to communicate with profibus gateway Swire-GW-DP correctly.
· The slave station can work with Siemens CPU without problems.
I hope you can give some advices,