Hello,
This is my scenario the ethenet of the slc is connected and the rs232 port is to be connected to the panelview.
will the panelview communicate this way to the slc?
now if it will do i use a staight through cable? or 2 to 3 pin crossover?
In doing this can my panelview run an application on another slc on my ethernet network (rslinx)?
My slc rack has also a RIO card, can this connect directly to another panelview with a RIO port?
With this set up can I read data from other plcs on my ethenet network and visualize these by creating an application on my panelviews?
Thats about a mouthful! I think my questiones are just about it for now...
thanks all
Saludos,
marcel from Buenos Aires...
This is my scenario the ethenet of the slc is connected and the rs232 port is to be connected to the panelview.
will the panelview communicate this way to the slc?
now if it will do i use a staight through cable? or 2 to 3 pin crossover?
In doing this can my panelview run an application on another slc on my ethernet network (rslinx)?
My slc rack has also a RIO card, can this connect directly to another panelview with a RIO port?
With this set up can I read data from other plcs on my ethenet network and visualize these by creating an application on my panelviews?
Thats about a mouthful! I think my questiones are just about it for now...
thanks all
Saludos,
marcel from Buenos Aires...