PLCRookie
Member
I have a NAIS FP1-C40 that has been pulled from storage after many years. Needless to say that the battery is dead, no program. I called the OEM, and all I could get were 5 diskettes (3.5)and a "good luck". It appears that I will (obviously)need to get a new battery, as well as a programming cable, but I am unsure as to what type of cable is needed. I have been to the Panasonic web site, and it seems that I will need a 232-422 converter to hook my laptop to the PLC. There is also another cable mentioned, to go to the "tool" port. I have FPSoft V1.06B. Will this software run under XP? Any help greatly appreciated