Emerson Unidrive 201m Questions

HarleyDavidson1965

Member
H
Join Date
Jul 2017
Location
Paducah
Posts
1
I am replacing a US Drive VFD with an Emerson 201m VFD and this is the first time I have ever installed one. I have it working so far in keypad mode but I need to set it up in remote mode at some point, right now my first question is if the Unidrive 201m has a terminal that I can utilize for a reset command sent from a remote DCS? Any help will be greatly appreciated.
 

Similar Topics

I
Red Lion to AB1400 and Emerson Unidrive with Crimson 2
Could someone lead me in the right direction? Using Crimson 2 and a 306 hmi unit how would you set up the allen bradley micrologix 1400 plc to be...
2
Replies
17
Views
8,619
DamianInRochester
DamianInRochester
I
Emerson Unidrive SP
Anyone had any experience with these. I have used mostly Yaskawa for the last few years, but a rep came in and has worked his magic on our boss...
Replies
2
Views
2,739
DamianInRochester
DamianInRochester
J
GE/Emerson Arrays with Functions
Two questions for GE/Emerson e.g. PACSystemsRX3i (CPE330): 1. Is it possible to use 2D arrays inside a function as a local member? (I can only...
Replies
0
Views
40
james13
J
M
Compact Guardlogix 5380 to Emerson deltav ok300 communication
gents, I am trying to configure communication with EMERSON PK300 controller through port A1 using generic ethernet communication module . I could...
Replies
0
Views
98
MohamedSK
M
S
Simulate/Force Analog Inputs with Emerson RX3i PACSystems?
Hi there, I'm doing some extensive testing and commissioning with a slew of new Emerson PACSystems RX3i PLCs. It would be convenient to...
Replies
5
Views
104
Steve Bailey
Steve Bailey
Back
Top Bottom