markus506
Member
HI everyone,
I am progressing 'reasonably' well in my first project, using a 1769-L24QB1B processor. I have found that I am using about 65% of the PLC's data/tag memory. Is there a way to find a breakdown of each routine/program to see which ones are using how much? Coming from an embedded world, I was able to do this, and my curiosity is piqued, since I don't think i have *that* large of a PLC program.
Thanks
-Mark
I am progressing 'reasonably' well in my first project, using a 1769-L24QB1B processor. I have found that I am using about 65% of the PLC's data/tag memory. Is there a way to find a breakdown of each routine/program to see which ones are using how much? Coming from an embedded world, I was able to do this, and my curiosity is piqued, since I don't think i have *that* large of a PLC program.
Thanks
-Mark