ma77c00k
Member
Is there a way I can get a parameter list value passed back to the logic?
I'm using FactoryTalk Studio 9.0 ME and RSLogix 5000 v30.
I have 2 GoTo Display buttons, when the first is selected it moves a 0 into parameter #4 in the list and when the second is selected it moves a 1 into parameter #4. I have verified this works by created a text box to view the literal number of parameter #4 like so: /*LN:1 #4 NOFILL DP:0*/
The problem I have is I can't find a way to move this value (1 or 0) back to the PLC.
The only way I could think of is using a MacroTen to read the value of #4 then write to a plc tag but it doesn't work because the read side thinks #4 is a tag instead of the parameter that it is.
I hope I'm missing something obvious, thanks in advance!
I'm using FactoryTalk Studio 9.0 ME and RSLogix 5000 v30.
I have 2 GoTo Display buttons, when the first is selected it moves a 0 into parameter #4 in the list and when the second is selected it moves a 1 into parameter #4. I have verified this works by created a text box to view the literal number of parameter #4 like so: /*LN:1 #4 NOFILL DP:0*/
The problem I have is I can't find a way to move this value (1 or 0) back to the PLC.
The only way I could think of is using a MacroTen to read the value of #4 then write to a plc tag but it doesn't work because the read side thinks #4 is a tag instead of the parameter that it is.
I hope I'm missing something obvious, thanks in advance!