UselessProgrammer
Lifetime Supporting Member
Hi,
Using factoryTalk view studio ver 6 to work on a HMI project. This project is been created by third party vendor and not able to access it fully.
This is basically a project that's been not updated from mer version. Recently, I have updated to ver 6.0 and all I see is some special characters while opening a parameter file. There are almost 10 parameter files been used, but all I can see is tag on object properties eg. #150 .
Please advise me, how to recover a corrupted parameter file.
Tried opening with notepad, notepad++, access, word - nothing worked.
Thanks.
Using factoryTalk view studio ver 6 to work on a HMI project. This project is been created by third party vendor and not able to access it fully.
This is basically a project that's been not updated from mer version. Recently, I have updated to ver 6.0 and all I see is some special characters while opening a parameter file. There are almost 10 parameter files been used, but all I can see is tag on object properties eg. #150 .
Please advise me, how to recover a corrupted parameter file.
Tried opening with notepad, notepad++, access, word - nothing worked.
Thanks.