You are not registered yet. Please click here to register!

plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
Try our online PLC Simulator- FREE.  Click here now to try it.

---------->>>>>Get FREE PLC Programming Tips

New Here? Please read this important info!!!

Go Back - Interactive Q & A > - Interactive Q & A > LIVE PLC Questions And Answers

PLC training tools sale

Thread Tools Display Modes
Old July 2nd, 2018, 03:05 PM   #1
United States

redbullsolja is offline
Join Date: Jul 2018
Location: iowa
Posts: 1
FTView Studio/RSLinx communications through DH+

Hello, I am attempting to complete an HMI project using FT View SE. The controller I will be reading is a PLC 5/30 that is on DH+. I can browse out to my DHRIO card but it stops there. When highlighted it just says "not browsing". Does RSLinx Enterprise not support DH+?
  Reply With Quote
Old July 6th, 2018, 01:33 PM   #2
Lifetime Supporting Member + Moderator

sthompson is offline
sthompson's Avatar
Join Date: Jan 2007
Location: Vernon, BC
Posts: 1,838
Welcome to the Forum!

RSLinx Enterprise does not support Browsing out to other Networks. You will have to install RSLinx Classic on your Server or Data Collection PC.

We have a similar setup, and installed RSLinx Classic. I didn't do it myself, but my understanding is that it will Activate with the SE License.

If you have Rockwell TechConnect, some searching around in the Knowledgebase should give you the information you need.

There's never time to do it right, but there is always time to do it over!
No trees were killed in the creation of this message.
However, many electrons were terribly inconvenienced.
  Reply With Quote
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
FTView ME unsupported communications protocol KingPresident LIVE PLC Questions And Answers 2 April 19th, 2018 01:38 PM
Rs232 to SLC 5/03 Problem YorkMa LIVE PLC Questions And Answers 17 June 2nd, 2017 12:37 PM
How to create VBA function to use in Events in FTView SE nikhilec2007 LIVE PLC Questions And Answers 0 January 6th, 2015 05:16 AM
FTView Studio ME communications issue LMBrian LIVE PLC Questions And Answers 2 June 14th, 2014 08:12 PM
FTView ME graphics import... Lemming LIVE PLC Questions And Answers 5 December 2nd, 2013 02:03 PM

All times are GMT -5. The time now is 04:28 PM.