vinitch
Member
Hello friends,
I am developing a application for Panelview plus 1000 colour using SLC 5/04 PLC.
I have following with me :
1) SLC 5/04 PLC with DF-1 & DH+ communication
2) Panelview Plus 1000 part number 2711P-T10C6D1 ( with DH+)
3) A laptop with COM port
I want to do following :
1) Panelview and SLC to communicate via DH+.
2) Download ladder logic to PLC from laptops com port connected
to PLC's DF1 (RS-232)port
3) Download RSView ME application into Panelview using laptop's
COM port & PV+ COM port.
The main aim is to have a dedicated DH+ link between PLC & Panelview plus and use COM port for UPLOAD/DOWNLOAD.
Is it possible ? If yes how to do itstep by step.
What will be the seetings in ladder file ( Channel 0 & Channel 1)
Are there any "terminal settings" available for panelview plus as available with Panelview standard ?
Kindly help.
Regards.
Vinit.
I am developing a application for Panelview plus 1000 colour using SLC 5/04 PLC.
I have following with me :
1) SLC 5/04 PLC with DF-1 & DH+ communication
2) Panelview Plus 1000 part number 2711P-T10C6D1 ( with DH+)
3) A laptop with COM port
I want to do following :
1) Panelview and SLC to communicate via DH+.
2) Download ladder logic to PLC from laptops com port connected
to PLC's DF1 (RS-232)port
3) Download RSView ME application into Panelview using laptop's
COM port & PV+ COM port.
The main aim is to have a dedicated DH+ link between PLC & Panelview plus and use COM port for UPLOAD/DOWNLOAD.
Is it possible ? If yes how to do itstep by step.
What will be the seetings in ladder file ( Channel 0 & Channel 1)
Are there any "terminal settings" available for panelview plus as available with Panelview standard ?
Kindly help.
Regards.
Vinit.