You are not registered yet. Please click here to register!


 
 
plc storereviewsdownloads
This board is for PLC Related Q&A ONLY. Please DON'T use it for advertising, etc.
 
Try our online PLC Simulator- FREE.  Click here now to try it.

New Here? Please read this important info!!!


Go Back   PLCS.net - Interactive Q & A > PLCS.net - Interactive Q & A > LIVE PLC Questions And Answers

Reply
 
Thread Tools Display Modes
Old December 10th, 2020, 10:59 AM   #1
Oliver Micka
Member
Slovakia

Oliver Micka is offline
 
Join Date: Oct 2015
Location: Hlohovec
Posts: 65
CompactLogix L35e and Micro 820/850

Hi all.
I need litle help.
I need connected Micro 850 ( 2080-LC50-24QWB) to a Main PLC (CompactLogix L35e) and send/recieve data throught Ethernet.
I have a several informtion : How make it.
In my CPU i have MSG instructions for read and write data with Micro850.

I tried change my old processor to a new processor only for test ( same type L35e ), but situation is the same.

But If i change processor to a "newer"L33ERM or L36ERM, everything seems OK. Comm between Micro850 and L33/36ERM was excelent and fast.

I used a same settings MSG instructions.
But L35e - still error " connection failure" in the RsLogix

Does anybody know, why CLX L35e cant send/recieve data throught ethernet with Micro 800 series?
Info:
CPU FW: 20.19
  Reply With Quote
Old December 10th, 2020, 11:12 AM   #2
geniusintraining
Lifetime Supporting Member + Moderator
United States

geniusintraining is offline
 
geniusintraining's Avatar
 
Join Date: Jun 2005
Location: SC
Posts: 8,105
Just a guess but what series is the L35e? if its a series A that may have been the improvements made to a series B but I am not sure
__________________
www.PLCCable.com PLC Communication Cables, PLC Trainers, MicroLogix, ControlLogix, Siemens, Allen Bradley and more...OEM and aftermarket supplies... Aftermarket 1784-U2DHP Allen Bradley USB to DH+, new USB to 485 modbus
  Reply With Quote
Old December 10th, 2020, 01:33 PM   #3
Ken Roach
Lifetime Supporting Member + Moderator
United States

Ken Roach is offline
 
Ken Roach's Avatar
 
Join Date: Apr 2002
Location: Seattle, WA
Posts: 17,101
There is a detailed RA Knowledgebase document that you have probably already read that describes configuration of MSG instructions in a Logix-family controller to target a Micro 800 series controller.

https://rockwellautomation.custhelp....ew/a_id/520228

Examine the selection for "connected" message on the Communications Path tab. I believe that it must be "unconnected" for older CompactLogix.
  Reply With Quote
Old December 11th, 2020, 02:09 AM   #4
Oliver Micka
Member
Slovakia

Oliver Micka is offline
 
Join Date: Oct 2015
Location: Hlohovec
Posts: 65
Quote:
Originally Posted by Ken Roach View Post
There is a detailed RA Knowledgebase document that you have probably already read that describes configuration of MSG instructions in a Logix-family controller to target a Micro 800 series controller.

https://rockwellautomation.custhelp....ew/a_id/520228

Examine the selection for "connected" message on the Communications Path tab. I believe that it must be "unconnected" for older CompactLogix.
I have tested MSG config for L33/L36, i believe that is the same config for all Logix CPU family. That is why i used the same config for proccessor L35e.
Nothing.
I tried use many address for a Path.
The standard Ethernet address for Logix CPU´s is " 2 " - for example: 2, 192.168.0.1.

If i change address to any number ( from 0 to 7 -I know, it is a nonsens, but i tried everything ) - nothing gonna happen - i have still communication error.
  Reply With Quote
Old May 3rd, 2021, 02:00 AM   #5
BShifty
Member
Australia

BShifty is offline
 
Join Date: Sep 2014
Location: Melbourne
Posts: 1
Try 1, 1, 2, 192.168.0.1 or LocalENB, 2, 192.168.0.1
  Reply With Quote
Old May 25th, 2023, 01:16 PM   #6
eromero425
Member
United States

eromero425 is offline
 
Join Date: Jun 2017
Location: El Paso, TX
Posts: 1
I'm also experiencing this issue, did you have any luck resolving it?
  Reply With Quote
Reply
Jump to Live PLC Question and Answer Forum


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Topics
Thread Thread Starter Forum Replies Last Post
L35E PID Problems Critt LIVE PLC Questions And Answers 17 December 19th, 2011 02:40 PM


All times are GMT -4. The time now is 09:56 AM.


.