jugenzhu1963
Member
Hi everybody
I got a problem with omron screen nt31c-st142b-ev2. i setup system configurtion which include that initial screen is #1 , control and notify area. i programm the screen data and download to PT without any errors. after power up the screen come up initial screen first and then showing nothing(just blank screen). both power and run lights on.plc(cpm2a) communicating light also come on indicating communicate with pt no problem. i go to system maintenance menu and i can see the screen no problem. i use port A ( host link ) to hook up with plc. anybody knows this problem and can help me.
lots of thanks
I got a problem with omron screen nt31c-st142b-ev2. i setup system configurtion which include that initial screen is #1 , control and notify area. i programm the screen data and download to PT without any errors. after power up the screen come up initial screen first and then showing nothing(just blank screen). both power and run lights on.plc(cpm2a) communicating light also come on indicating communicate with pt no problem. i go to system maintenance menu and i can see the screen no problem. i use port A ( host link ) to hook up with plc. anybody knows this problem and can help me.
lots of thanks