Note that if you are using FactoryTalk Gateway remotely, you need to install it as Gateway on the server and you also need to install it as Remote Gateway on the client. Installing it on the client configures a lot of things for you, like OPCEnum and setting up drivers.
On the server, you need to open [FONT="]FactoryTalk Administration Console, [/FONT]create a Linx Server, and add a new Application. You then open the communication setup and add a device shortcut, identical to how it's done in FTView ME/SE.
On the server, you then need to open [FONT="]FactoryTalk Linx Gateway Configuration and set the FactoryTalk Directory Scope to the new application you created in the administration console.[/FONT]