convert STL to LADD,
Hi frd,
Thank you for your reply,
Please refer below my program details,
i need to control the speed of outerhood film,(example network-5)
please advise me some more details for speed control and convert the ladd program,
and how to change,
Thankyou in advance!
Saravanan
FC27 - <offline>
"speed shrink frame" speed shrink frame:
Network: 1 initialisieren
&
M0.6
FALSE
"M 0.6"
=
M130.0
lift
speed n11
"M 130.0"
=
M130.1
lift
speed n12
"M 130.1"
=
M130.2
lift
parameter
commutitat
ion
"M 130.2"
--------
Network: 2 (N = 0,53m/s bis Ablage Schrumpfrahmen)
O "M 1226.5" M226.5 -- step 5 length of hood
O "M 1226.6" M226.6 -- step 6 film separators up
O "M 1226.7" M226.7 -- step 7 sealing - cutting
O "M 1227.0" M227.0 -- step 8 pressure arms forward
O "M 1227.1" M227.1 -- step 9 hood over stack
O "M 1227.2" M227.2 -- step 10 start burner
AN "M 128.0" M128.0 -- lift pos.place shrink frame
AN "M 128.1" M128.1 -- lift pos.speed up after place shrink fra
AN "M92.7" M92.7 -- double hood
JC M001
JU M002
M001: = "M 130.0" M130.0 -- lift speed n11
= "M 130.1" M130.1 -- lift speed n12
= "M 130.2" M130.2 -- lift parameter commutitation
BEU
M002: NOP 0
------------
Network: 3 (N = ca.0.03m/s Ablage Schrumpfrahmen)
A "M 1227.2" M227.2 -- step 10 start burner
A "M 128.0" M128.0 -- lift pos.place shrink frame
AN "M 128.1" M128.1 -- lift pos.speed up after place shrink fra
AN "M92.7" M92.7 -- double hood
O "M 170.4" M170.4 -- start maintenance mode
JC M003
JU M004
M003: = "M 130.0" M130.0 -- lift speed n11
BEU
M004: NOP 0
----------
Network: 4 (N = 0.53m/s nach Ablage Schrumpfrahmen)
A "M 1227.2" M227.2 -- step 10 start burner
A "M 128.0" M128.0 -- lift pos.place shrink frame
A "M 128.1" M128.1 -- lift pos.speed up after place shrink fra
AN "M92.7" M92.7 -- double hood
JC M005
JU M006
M005: = "M 130.0" M130.0 -- lift speed n11
BEU
M006: NOP 0
-----------
Network: 5 (N = 0,53m/s Spreizfinger Rahmen senken Folie 2 (schwarze Folie))
O "M 1226.5" M226.5 -- step 5 length of hood
O "M 1226.6" M226.6 -- step 6 film separators up
O "M 1226.7" M226.7 -- step 7 sealing - cutting
O "M 1227.0" M227.0 -- step 8 pressure arms forward
O "M 1227.1" M227.1 -- step 9 hood over stack
O "M 1227.2" M227.2 -- step 10 start burner
A "M92.7" M92.7 -- double hood
AN M 128.5
AN "M 128.6" M128.6 -- speed change to slow down
JC M007
JU M008
M007: = "M 130.0" M130.0 -- lift speed n11
= "M 130.1" M130.1 -- lift speed n12
= "M 130.2" M130.2 -- lift parameter commutitation
BEU
M008: NOP 0
-----------
Network: 6 (N = 0,53m/s bis take up Shrinkframe)
A "M 1227.5" M227.5 -- step 13 shrink frame up
AN "M 128.2" M128.2 -- lift pos.take up shrink frame
AN "M 128.3" M128.3 -- lift pos.speed up after take up shrinkf
AN "M 126.4" M126.4 -- lift pos.1 change speed
AN "M 126.5" M126.5 -- lift pos.2 change speed
AN "M 126.6" M126.6 -- lift pos.3 change speed
AN "M 126.7" M126.7 -- lift pos.4 change speed
JC M009
JU M010
M009: = "M 130.0" M130.0 -- lift speed n11
BEU
M010: NOP 0
-------------
Network: 7 (N = ca.0.03m/s take up Schrumpfrahmen)
A "M 1227.5" M227.5 -- step 13 shrink frame up
A "M 128.2" M128.2 -- lift pos.take up shrink frame
AN "M 128.3" M128.3 -- lift pos.speed up after take up shrinkf
AN "M 126.4" M126.4 -- lift pos.1 change speed
AN "M 126.5" M126.5 -- lift pos.2 change speed
AN "M 126.6" M126.6 -- lift pos.3 change speed
AN "M 126.7" M126.7 -- lift pos.4 change speed
JC M011
JU M012
M011: = "M 130.0" M130.0 -- lift speed n11
BEU
M012: NOP 0