ayoung87
Member
I just got an omron NS5-MQ00B-V2 touch screen to communicate with an omron CJ1M CPU22 PLC. Monitoring and changing time and speed values works fine just by writing to DM and TIM addresses.
The problem I'm having is the basic Start and Stop buttons. I have the "Operation" screen set up with a separate Start and Stop button.
The start button is ON/OFF Button, Write Address is SERIALA:WR000030.00, which is the address in the PLC program for "HMI_Start," and then for Action I have Momentary.
When the PT is connected and communicating with the PLC and I try to push Start or any button trying to access a BOOL address, I get an error saying something about an error writing address to SERIALA. What am I doing wrong?? Any help would be great. Thanks.
The problem I'm having is the basic Start and Stop buttons. I have the "Operation" screen set up with a separate Start and Stop button.
The start button is ON/OFF Button, Write Address is SERIALA:WR000030.00, which is the address in the PLC program for "HMI_Start," and then for Action I have Momentary.
When the PT is connected and communicating with the PLC and I try to push Start or any button trying to access a BOOL address, I get an error saying something about an error writing address to SERIALA. What am I doing wrong?? Any help would be great. Thanks.