Big Brunsy
Lifetime Supporting Member
So I have a system that is running on DeviceNet. We have been having nothing but problems with it for the last 3 years. I am trying to switch one node of Remote I/O from communicating with a 1769-ADN to a 1769-AENTR. I have never had to configure an SM2 before, and I thought I did everything correctly by reading the manuals.
There are 3 local 1769-SM2s and then 2 more in this remote rack. When I readdressed everything i copied the logic from the Local ones and just addressed to the remote ones. When I installed the new AENTR and downloaded the program all of the drives just either give a comm loss fault, or sit there and do nothing.
I have included both versions of the ACD file and the DNT file if someone wants to take a look and see what I did wrong, I would greatly appreciate it.
Files too big to attach. Can be found here..
https://drive.google.com/drive/folders/1E3Pjfx_Hhq3_e011iFle9TSxwYpTWgYX?usp=sharing
There are 3 local 1769-SM2s and then 2 more in this remote rack. When I readdressed everything i copied the logic from the Local ones and just addressed to the remote ones. When I installed the new AENTR and downloaded the program all of the drives just either give a comm loss fault, or sit there and do nothing.
I have included both versions of the ACD file and the DNT file if someone wants to take a look and see what I did wrong, I would greatly appreciate it.
Files too big to attach. Can be found here..
https://drive.google.com/drive/folders/1E3Pjfx_Hhq3_e011iFle9TSxwYpTWgYX?usp=sharing
Last edited: